PLASMOIL MR SERIES
PLASMOIL |
|
MR-H |
MR-A |
MR-B |
Viscosity @100°C, mm²/s |
D445-14 |
300 |
330 |
250 |
Viscosity Index |
D2270 |
285 |
300 |
250 |
Flash point, °C |
D92 |
275 |
275 |
300 |
Fire point, °C |
D92 |
310 |
310 |
325 |
Specific Gravity |
D1298 |
0.9 |
0.9 |
0.9 |
Saponification number |
D94-07 |
90 |
90 |
90 |
Glycerides (veg. oil), %Wt |
Content |
50 |
50 |
50 |
Mineral oil (paraffinic), %Wt |
Content |
50 |
50 |
50 |
PLASMOIL BIO SERIES
PLASMOIL |
|
BIO 1 |
BIO 6 |
BIO 3 |
Viscosity @100°C, mm²/s |
ASTM D445-14 |
125 |
300 |
400 |
Viscosity Index |
ASTM D2270-17 |
265 |
300 |
315 |
Flash point, °C |
ASTM D92-16b |
300 |
300 |
300 |
Fire point, °C |
ASTM D92-16b |
325 |
325 |
325 |
Density, kg/L |
ASTM D1298-12b |
0.92 |
0.92 |
0.92 |
Saponification number |
ASTM D94-07 |
180 |
180 |
180 |
Glycerides (veg. oil), %wt |
Content |
100 |
100 |
100 |
Plasmoil products are honey-like bio-compounded bases which combine antagonist properties like high dipolar moment, high viscosity, dispersion, physical adhesiveness and anti-oxidation effect.
PLASMOIL™ exhibit maxi-lubricity effect thanks to its capacity of forming a protection film with a unique combination of high viscosity, low volatility and high adsorption to the covered surfaces.
Plasmoil is classified under API Group V category, PLASMOIL are used as Base stock or components for a variety of lubricants, greases and fuel additives.
PLASMOIL™ are Reach compliant, non-toxic and possess a benign HSE profile. PLASMOIL™ Bio line is furthermore ultimately biodegradable and meets HX-1 requirements for use in food-grade lubricants and greases.
Properties:
- Plasmoil products bring Several properties to a formulation:
- a lower friction through an intrinsec low friction coefficient.
- a lower friction by extending the boundary regime.
- a lower friction by inducing an earlier hydrodynamic regime.
- a lower friction by improving the surface finish of the rubbing surfaces.
- a synergetic effect with EP additives on the load-carrying.
- a higher adsorption capacity making it adequate for high temperature operations.
- a dispersion, which can be used for stabilizing nano-additives or particulates.
- a cleanliness to engines and machinery.
- a self-healing effect on rubbing surfaces by rolling in the asperities rather than grinding them out.
- an increase in power and more fuel efficiency.
- an Increase of VI in similar proportions than an OCP.
- A smooth lubrication, even bringing a reduction of noise.
|